Author
|
Topic: Planetdance Triwheel?
|
Salaya Knowflake Posts: 38 From: UK Registered: Aug 2018
|
posted January 02, 2020 08:34 AM
Im hoping someone can help me out here who has this software, I've only just downloaded this today mainly to look at converse charts.I can't find any option at all on any tab to do a bi-wheel or even better a Tri wheel. There is a youtube video where someone is doing a review on this software, and in his video, he has the tri-wheel option, which is in the horoscope tab and then at the bottom, but I just don't seem to have it. Does anybody know where I need to be looking? IP: Logged |
Graham Knowflake Posts: 626 From: Registered: Apr 2019
|
posted January 02, 2020 09:29 AM
If you have a Windows 10 PC ... download, instal and use the free Astrocalc 6.5 software at http://www.astrocalc.com The download link is at the bottom of the opening page/screen of that link. ... And, at http://www.astrocalc.com/astrocalc-download-page/ IP: Logged |
Salaya Knowflake Posts: 38 From: UK Registered: Aug 2018
|
posted January 02, 2020 10:02 AM
Thanks, Graham for this, I've downloaded it, but its thrown my chart angles off. My 29-degree Sagg ascendant is now a 3 degrees Capricorn.Im not too sure why this is. IP: Logged |
Graham Knowflake Posts: 626 From: Registered: Apr 2019
|
posted January 02, 2020 10:29 AM
quote: Originally posted by Salaya: Thanks, Graham for this, I've downloaded it, but its thrown my chart angles off. My 29-degree Sagg ascendant is now a 3 degrees Capricorn.Im not too sure why this is.
The Planetdance tri-wheel appears to be an option in the "Horoscopes" drop-down menu.Check/double-check that you have input the correct/same time of birth in both your Astrocalc and Planetdance natal data. And confirm which is correct by drawing your chart at Astro.com (as their daylight and time zone calculations are rarely wrong).
IP: Logged |
Salaya Knowflake Posts: 38 From: UK Registered: Aug 2018
|
posted January 02, 2020 11:06 AM
quote: Originally posted by Graham: [QUOTE]Originally posted by Salaya: [b]Thanks, Graham for this, I've downloaded it, but its thrown my chart angles off. My 29-degree Sagg ascendant is now a 3 degrees Capricorn.Im not too sure why this is.
The Planetdance tri-wheel appears to be an option in the "Horoscopes" drop-down menu.Check/double-check that you have input the correct time of birth in your Astrocalc and Planetdance natal data. And confirm which is correct by drawing your chart at Astro.com (as their daylight and time zone calculations are rarely wrong).[/B][/QUOTE] quote: On the youtube video of the review of planetdance, the guy has it in his horoscope drop-down menu, but in mine, it's not there. I wonder if I've downloaded the wrong version? even though I have updated it even to see if this helped.And my correct natal time/data is correct in both. Even though comparing it to Astro.com, planet dance puts my Ascendant at 29'41 and on Astro.com it is 29'40 ...but this isn't a concern.
IP: Logged |
Graham Knowflake Posts: 626 From: Registered: Apr 2019
|
posted January 02, 2020 12:28 PM
quote: Originally posted by Salaya:
Can we please test this ... by using Astrocalc to draw a chart for 18:00 pm Greenwich, London, UK on 2nd January 2020. (That produces a 5Leo06:29 Ascendant and 12Aries52:32 MC on my software - with Moon at 6Aries55:21). On Astro.com, it produces 5Leo06:05 Asc ... 12Aries52:23 MC and Moon at 06Aries55:12. What does it produce on your Astrocalc software? IP: Logged |
Salaya Knowflake Posts: 38 From: UK Registered: Aug 2018
|
posted January 02, 2020 12:59 PM
I would test it, if only every time i clicked on London the page didn't remove itself, where i have to then reload the icon. I've just uninstalled it and reinstalled and it's doing the same thing. Anyone would think its Mercury retrograde right now, with the luck I'm having today. IP: Logged |
Graham Knowflake Posts: 626 From: Registered: Apr 2019
|
posted January 02, 2020 01:21 PM
quote: Originally posted by Salaya: I would test it, if only every time i clicked on London the page didn't remove itself, where i have to then reload the icon. I've just uninstalled it and reinstalled and it's doing the same thing. Anyone would think its Mercury retrograde right now, with the luck I'm having today.
We want Greenwich rather than London, though. Click on the place box on the data entry page, then select Greenwich and click on the "load" box. Then be sure to save the chart and click on the "add" box.
IP: Logged |
Salaya Knowflake Posts: 38 From: UK Registered: Aug 2018
|
posted January 02, 2020 01:32 PM
When I click on the place box on the data entry page, the only option to click on that comes up is London(England). Greenwich is not even an option.I don't know what's wrong with it. IP: Logged |
Salaya Knowflake Posts: 38 From: UK Registered: Aug 2018
|
posted January 02, 2020 01:46 PM
Well, I'm maybe finally getting somewhere with the planet dance. I sent an email to Planetdance querying the issue. And I have had a reply saying that bi/tri wheels are under file drop-down, then you go to synastry and the extended options for bi/tri/quad wheels are there.IP: Logged |
Graham Knowflake Posts: 626 From: Registered: Apr 2019
|
posted January 02, 2020 01:46 PM
London comes up as a "quick place" - but there should be an alphabetical list of places in the larger box on the left of the screen. … Perhaps the atlas file has not loaded correctly during installation, but reinstalling should have resolved that.IP: Logged |
Graham Knowflake Posts: 626 From: Registered: Apr 2019
|
posted January 03, 2020 01:47 AM
quote: Originally posted by Salaya: Well, I'm maybe finally getting somewhere with the planet dance. I sent an email to Planetdance querying the issue. And I have had a reply saying that bi/tri wheels are under file drop-down, then you go to synastry and the extended options for bi/tri/quad wheels are there.
I have now installed the planetdance program on my Windows10 PC, Salaya … and am impressed by its functionality. However, the tri-wheel that I ran (via file-> synastry-> tri-wheel) was too small for me … and not as clear/easy to read as the one produced by Astrocalc. But, perhaps there is a way to increase the size of the displayed planetdance tri-wheels … as the bi-wheels are big/clear/easy-to-read. IP: Logged |
Salaya Knowflake Posts: 38 From: UK Registered: Aug 2018
|
posted January 03, 2020 05:24 AM
quote: Originally posted by Graham: I have now installed the planetdance program on my Windows10 PC, Salaya … and am impressed by its functionality.However, the tri-wheel that I ran (via file-> synastry-> tri-wheel) was too small for me … and not as clear/easy to read as the one produced by Astrocalc. But, perhaps there is a way to increase the size of the displayed planetdance tri-wheels … as the bi-wheels [b]are big/clear/easy-to-read. [/B]
Same as me Graham, I am impressed with it too. I'm sure there is a way to increase the size, but right now I'm just not sure how. Tbt I'm having a little trouble with producing a Tri wheel I've managed a bi-wheel. When I click on horoscope 3 to add the 3rd chart, there is no chart saved even though I've saved it prior.I'm specifically wanting to look at converse progression/forward progression/natal. And also the chart info at the right-hand side, one is slightly overlapping the other making it hard to read, this is why I'm sure there is an option to change all this, it's just knowing how. Jean Cremers has been very helpful with me so far via email. The email is.. Jeancremers@home.nl Maybe you could email about the issue. IP: Logged |
Graham Knowflake Posts: 626 From: Registered: Apr 2019
|
posted January 03, 2020 03:35 PM
quote: Originally posted by Salaya: Same as me Graham, I am impressed with it too. I'm sure there is a way to increase the size, but right now I'm just not sure how. Tbt I'm having a little trouble with producing a Tri wheel I've managed a bi-wheel. When I click on horoscope 3 to add the 3rd chart, there is no chart saved even though I've saved it prior.I'm specifically wanting to look at converse progression/forward progression/natal. And also the chart info at the right-hand side, one is slightly overlapping the other making it hard to read, this is why I'm sure there is an option to change all this, it's just knowing how.Jean Cremers has been very helpful with me so far via email. The email is.. Jeancremers@home.nl Maybe you could email about the issue.
I think you have to first open all three charts. Then select tri-wheel. I have now emailed Jean re how to make the tri-wheel bigger.IP: Logged |
Graham Knowflake Posts: 626 From: Registered: Apr 2019
|
posted January 04, 2020 05:20 AM
quote: Originally posted by Graham: [QUOTE]Originally posted by Salaya: [b] Same as me Graham, I am impressed with it too. I'm sure there is a way to increase the size, but right now I'm just not sure how. Tbt I'm having a little trouble with producing a Tri wheel I've managed a bi-wheel. When I click on horoscope 3 to add the 3rd chart, there is no chart saved even though I've saved it prior.I'm specifically wanting to look at converse progression/forward progression/natal. And also the chart info at the right-hand side, one is slightly overlapping the other making it hard to read, this is why I'm sure there is an option to change all this, it's just knowing how.Jean Cremers has been very helpful with me so far via email. The email is.. Jeancremers@home.nl Maybe you could email about the issue.
I think you have to first open all three charts. Then select tri-wheel. I have now emailed Jean re how to make the tri-wheel bigger.[/B][/QUOTE] Jean replied immediately, Salaya. ... But, unfortunately, only to say "sorry, but that is just the way the tri and quad-wheels are.".
IP: Logged |
Salaya Knowflake Posts: 38 From: UK Registered: Aug 2018
|
posted January 04, 2020 06:20 AM
That's a shame. The only thing I can think of for you to do would be to magnify your screen.https://support.microsoft.com/en-gb/help/11542/windows-use-magnifier-to-make-things-easier-to-see IP: Logged |
Graham Knowflake Posts: 626 From: Registered: Apr 2019
|
posted January 04, 2020 09:41 AM
quote: Originally posted by Salaya: That's a shame. The only thing I can think of for you to do would be to magnify your screen.https://support.microsoft.com/en-gb/help/11542/windows-use-magnifier-to-make-things-easier-to-see
I can use Astrocalc 6.5, as that and Planetdance are on the same computer and can be used together.
IP: Logged |
Randall Webmaster Posts: 121587 From: From a galaxy, far, far away... Registered: Apr 2009
|
posted January 11, 2020 05:39 PM
Bump!IP: Logged |
Randall Webmaster Posts: 121587 From: From a galaxy, far, far away... Registered: Apr 2009
|
posted January 16, 2020 06:22 PM
Bump!IP: Logged |